Taroma 360 Ball Vape Housing by QaromaShop

1 x Taroma Lite Plus Titanium Housing only

*Not supplied with pearls or a coil

Set up:

All QaromaShop kits supplied through A Friend Indeed Australia come pre-assembled and primed for use (a coil burn off is performed in-house, coils are stretched (Lite Plus/360 range) and the coil handle is fitted before being dispatched/offered for sale).

To get started, all you'll need to do is unscrew the top of the housing, place the coil around the housing with the straight handle end facing upward. Fill the housing with the Ruby Pearls included and screw the top of the housing back on (being careful not to overtighten or overfill with pearls). Place the housing into the suet jade porcelain stand, plug the coil into the PID, turn your PID on and set to the desired temperature - we find that 375f to 490f is a good range depending on your heat soak time. Whilst waiting for your device to reach the desired temperature, fit your screen to the desired level, or use the basket screen, and using the stainless-steel scoop, loosely pile your herb into the bowl. Once the Taroma 360 is at temperature, place the housing over the bowl, heat soak for between 15 seconds and 90 seconds (longer soak time for lower temps, shorter soak time for higher tmps) then begin inhaling.

Suggested soak times from the QaromaShop website-

375f – 410f: 60-90 second soak 410f – 450f: 30-60 second soak 450F – 490f: 15-30 second soak

Note that you should pull residual heat from the stem with your last inhale after lifting the housing, as this is a common step for conduction-leaning devices. Additionally, it's highly recommended to use the Taroma 360 with a carbed passthrough or ash catcher, so that you're able to clear the hit without lifting the housing.

The Taroma 360 fits around 195 x 3mm pearls, most of which sit directly in the heater coil zone. The additional air holes have been chamfered to increase airflow and accommodate concentrate use; the top 5% of the gem stone chamber does not sit in the coil zone and therefor ensures any concentrate added has to melt through to the coil zone and not completely vaporize off immediately. A few threads on the cap can be sacrificed, to increase Gemstone Chamber capacity further. This is not necessary for most users.

Cleaning:

Cleaning your Taroma 360 is pretty straightforward. For optimal airflow, we recommend swapping screens every few bowls. Users can brush out their bowl and screen after each use, which will help airflow stay open for longer. Bowls and screens can be soaked in isopropyl alcohol and rinsed for easy cleaning.

It is important to note that after resting the heater in the porcelain stand for a short period, it will feel like touching a bowl of hot soup- safe to touch for a few seconds but hot none-the-less.

*Do not, under any circumstances, leave your Taroma 360, or any QaromaShop products unattended while in use or turned on. A Friend Indeed Australia does not take any responsibility or assume liability for the improper use of products nor hazards or injury caused by negligence.