The Eleaf iStick Pico 75w TC MOD supports VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR Mode. Powered by a single 18650 Cell this mod delivers high power in a compact size.
- Size: 45mm x 23mm x 70.5mm
- Voltage: Max 9V
- Wattage (maximum): 75W
- Battery: High rate 18650 cell (Continuous discharge current should be above 25A)
- Mode: VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR
- Resistance range: 0.05 - 1.5ohm (TC modes); 0.1 - 3.5ohm (VW/Bypass mode)
Whats in the box?
- 1 x iStick Pico MOD (without cell)
- 1 x USB Cable
How to operate-
Power on and off: Install a high-rate 18650 battery(discharge current above 25A); press fire button 5 times continuously to turn on/off the device.
Vaping: Long press the fire button and take a puff.
Stealth function: While the device is on, simultaneously hold the fire button and the down button. This will allow you to switch between the Stealth on and off function.
Lock/unlock: While the device is on, simultaneously keep pressing up and down buttons for 2 seconds. This will allow to switch between lock and unlock.
Switch the display Mode: While the device is powered off, keep pressing up and down buttons simultaneously for 2 seconds, the display will rotate 180 degrees.
Shift between VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode: While the device is on, press the fire button 3 times in quick succession, the first row will flash to indicate you entering the menu. Press the up or down button to switch between different modes. Then press the fire button one time to confirm the mode you chose.
How to charge: You can take out the lithium-battery from the device and then charge the cell itself. Moreover, it can also be charged in the iStick Pico via USB cable.