Ceroma Ceramic Ball Vape Kit by QaromaShop
Ceroma Ceramic Ball Vape Kit by QaromaShop
The Ceroma is a pure convection desktop herbal ball vape by QaromaShop. All QaromaShop ball vapes are designed to be used exclusively with scientific glassware (specifically 14mm and 18mm). QaromaShops tag line is "As end game as it gets" and we couldn’t have put it better ourselves. Engineered to achieve maximum extraction of your herb per draw, the QaromaShop line really have filled the gap in the herbal vape market to satisfy patients want and need of efficiency and face-full-of-vape desires. If you’re after the hardest hitting herbal desktop vapes on the market, look no further than the QaromaShop line of ball vapes- As End Game As It Gets!
The Ceroma is the ceramic iteration of the QaromaShop line, striking the perfect balance between flavour and vapour.
Best run between 600f and 650
Not recommended to be used as a double decker/with concentrates.
*Do not, under any circumstances, leave your Ceroma, or any QaromaShop products unattended while in use or turned on. A Friend Indeed Australia does not take any responsibility or assume liability for the improper use of products nor hazards or injury caused by negligence of the operator.
The coil does not need to be stretched to use with the Ceroma housing. Some people do like to slightly separate their coils for more even heating however. If you do need to stretch your coil from any reason, instructions can be found below.
Use a small flat head screwdriver or similar tool and be careful not to slip and stab yourself in the fingers. Insert the tool in between the first coil and slowly lever it back and forth, making small adjustments. Keep sliding the tool along the coil, stretching as you go, all the way to the bottom of the coil until its stretched to the desired size. The coil needs to be stretched slightly longer than the Gemstone Chamber length, and then pushed back (like a spring) with the cap, for a good and tight fit.
Burning off a coil:
All QaromaShop kits and coils supplied through A Friend Indeed Australia come already primed for use and a coil burn off has already been performed in house. If you do need to perform a burn off for any reason, the instructions can be found below.
Place the coil in the porcelain stand, plug it in to the PID, turn it on and set to 900°F. Wait for 15-20 minutes to let the coil heat up and burn off any residual oils or contaminants from the manufacturing process. After the burn off is complete, turn off the PID and let you coil cool down completely before handling.
Fitting the wooden handle:
All QaromaShop kits supplied by A Friend Indeed Australia come with the wooden handles already fitted, however if you need to fit a replacement, follow the instructions below.
Flatten out the 5 wires inside the heater cable by rolling them under your thumb and forefinger. When you can feel they're all side by side, while still holding the cables in place, push the cable into the groove of the handle and slide the handle along the cable until the cable runs through the entire length of handle. Its easiest to start at least the length of the handle away from the coil end of the cable to give enough space to slide the handle along whilst fitting. The handle should be slid along the cable until it sits over the silver connector that connects the cable to the metal coil.
Coil (Male 5 pin XLR connector) PIN 1 = TC-, PIN 2 = TC+, PIN 3 = GND, PIN 4 = AC-, PIN 5 = AC+
- 1 x Ceroma Ceramic Housing
- 1 x 20mm Test Fitted Ceroma Coil
- 1 x PID Controller with AU Jug Plug
- 1 x Walnut Stabilized Wood Coil Handle
- 1 x Suet Jade Porcelain Stand
- 10 x 17mm Stainless Steel screens
- 1 x Stainless Steel Scoop/Stirring tool
- 1 x Pack of 3mm Ruby Pearls (approx 165 pieces)
All QaromaShop kits supplied through A Friend Indeed Australia come pre-assembled and primed for use (a coil burn off is performed in-house, coils are stretched (Lite Plus range) and the coil handle is fitted before being dispatched/offered for sale).
To get started, all you'll need to do is unscrew the top of the housing, place the coil inside with the straight handle end facing upward, fill the housing with the Ruby Pearls and screw the top of the housing back on (being careful not to overtighten or overfill with pearls). Place the housing into the suet jade porcelain stand, plug the coil into the PID, turn your PID on and set to the desired temperature - we find that 600f to 650f is a good range. Whilst waiting for your device to reach the desired temperature, using the stainless-steel scoop, loosely pile your herb into the bowl. Once the Ceroma is at temperature, simply place the housing on top of your bowl and begin inhaling. NB. Some people like to "heat soak" their bowl before the first hit. To do this, place the pre-heated housing on top of your bowl and wait 15-30 seconds before inhaling.
The Ceroma fits around 165 x 3mm pearls, most of which sit directly in the heater coil zone. The additional air holes have been chamfered to increase airflow. A few threads on the cap can be sacrificed, to increase Gemstone Chamber capacity further. This is not necessary for most users.
It is important to note that after resting the heater in the porcelain stand for a short period, it will feel like touching a bowl of hot soup- safe to touch for a few seconds but hot none-the-less.
*Do not, under any circumstances, leave your Ceroma Lite Plus, or any QaromaShop products unattended while in use or turned on. A Friend Indeed Australia does not take any responsibility or assume liability for the improper use of products nor hazards or injury caused by negligence.
Cleaning your Ceroma is pretty straightforward. For optimal airflow, we recommend swapping screens every few bowls. Users can brush out their bowl and screen after each use, which will help airflow stay open for longer. Bowls and screens can be soaked in isopropyl alcohol and rinsed for easy cleaning.
JOIN THE HIGH END SOCIETY
If you're a big-time enthusiast of high-end glass, you'll love our exclusive 'High End Society'! We offer members of the 'High End Society' access to our limited access mailing list. This list offers special quarterly discounts on online items from our store, as well as early access to our latest and greatest high-end glass. If you've always wanted to be ahead of the curve when it comes to our brand new glass drops, you're in for a treat!LEARN MORE
Sign up for 5% off on your first order!
Join our newsletter to receive exclusive offers, stay in the loop, and be the first to know when new products drop.
- Choosing a selection results in a full page refresh.